There are a lot of benefits of sealing your asphalt driveway. As a matter of fact, potholes can be developed when water penetrates through cracks and settles down beneath the surface, jeopardizing the strength of the base in the process. Chips and cracks which were filled with water may also lead to damage from freezing. Grass can grow in the cracks from the unsealed asphalt driveway in warmer climates. This time, you might need the help of asphalt crack repair Hanover PA. 

 Asphalt Driveway

Common Mistakes You Need to Avoid 

One common error committed in sealing your asphalt driveway is setting thick layers of sealer, believing that it will give you more protection on the asphalt driveway’s surface. But a thin layer must be just enough to do the sealing. Nonetheless, you should always follow the manufacturer’s directions of the asphalt driveway sealer. 

An asphalt driveway sealer should be used an utmost duration of six months after its first setting up. It must then be used at least once in every one to three years. Sealing your asphalt driveway once a year can be performed where cold climate can be harsh and long however, this could lead to a slick surface. 

When preparing to seal your asphalt driveway, ensure that the weather is very cooperative as well as the ground temperature must be somewhere at 45 degrees Fahrenheit. On the other hand, dry weather must be expected for the next 3 days, at least. 

They Use the Right Protective Gear 

One must prepare for asphalt driveway sealing with the use of appropriate gear like gloves. An asphalt driveway sealer is a chemical which must not be physically in contact with your skin. In addition to that, inhaling the scent is also very hazardous to one’s health. 

In preparing to seal your asphalt driveway, make sure to get rid of all the grasses which overhangs the corners of your asphalt driveway surface. Stains from gas as well as oil should also be cleaned up with the use of a special cleaning agent which can be bought in most automobile supply stores. Clean the surface of the asphalt driveway using a broom. Fill in depressions and cracks with patching compounds. 

Removing Stains and Dirt First 

Stains and dirt should be first taken out before you seal your asphalt driveway. With the use of a hose, get rid of the stains and dirt missed during the cleaning process. One optional way is to clean the asphalt driveway surface using a pressure washer because it makes the job more effective and a lot easier. Then, allow it to dry. 

First, turn the sealer upside down to pre-mix the contents. Continue stirring the contents from time to time after opening the tub. Through this process, it will mix the asphalt driveway sealer well. 

Seal One Edge at a Time 

The most efficient method in working on an asphalt driveway is to put the sealer in one corner. Experienced and professional workers usually start on the smaller portion one at a time instead of working on the longer strip.